隨著技術的提高，企業在鋁卷加工的技術也提高了，鋁卷是通過鑄軋機經過壓延而成，當我們在運輸過程中，不可將鋁卷和化工產品混合裝置，并且要保證車廂的清潔干爽，做到無污染。
With the improvement of technology, enterprises in aluminum coil processing technology also improves, aluminum coil is made ??by casting machine after rolling, when we in the transport process, not the aluminum coil and chemicals mixing device, and to ensure car clean and dry, so no pollution.
　　
鋁卷的最佳運輸方式可以采用封閉式車廂或者船艙等方式進行運輸，也可以用敞車裝運，在運輸的時候需要注意檢查貨物是否捆綁牢固，做好防水防潮等措施，確保車廂內雨水都進不來。當貨物需要取下時，應該存放在倉庫內，如果是存在露天的庫房那么就要做好一系列的防護措施了，同時我們在裝卸的時候要輕拿輕放，以免損壞包裝箱中鋁卷。
Aluminum coil best mode of transport and other enclosed compartment can be used for transportation or cabin way, you can also use gondola shipment in transit when the need to pay attention to check whether the bundle of goods firm, good waterproof and other measures to ensure that rainwater went into the compartment do not come. When the need to remove the goods, should be stored in the warehouse, if the existence of the open-air warehouse then they would do a series of protective measures, and while we are loading and unloading time to gently, so as not to damage the aluminum coil box .

在鋁卷搬運過程中,小心保護同時必須正確掌握搬運和存放的方法,注意邊角的保護,鋁卷理想的停放是在平整的場地,搬運過程中應面與面疊搬運,禁止單人搬運.注意邊角保護.避免在搬運的過程中出現摩擦,影響鋁卷的外表,從而影響裝飾效果。儲存的場所要保持通風和干燥,不要放在潮濕,陰暗的場所.如果是放置在露天的情況下,應將其蓋住,避免雨雪天氣,遭受腐蝕，儲存于通風、干燥處,避免日光直射。
In the aluminum coil handling process, be careful to protect simultaneously handling and storage methods must correctly grasp the attention corner protection, aluminum coil ideal venue parked in formation, handling process should be stacked surface and surface transportation, prohibit single person handling Note corner protection. avoid friction in the process of handling, the impact of the appearance of aluminum coil, thus affecting the decorative effect. Storage place to keep ventilation and dry, not on a wet, dark place. If this is the case is placed in the open air, it should be covered to prevent rain and snow from corrosion, stored in ventilated, dry place, avoid sunlight direct.
 

濟南鋁卷：http://www.pdadn.com/