濟南鋁卷具有表面防雨、抗撞擊、外觀顏色多樣，裝飾性強、使用壽命長等特點，是一種新型保溫裝飾一體化的高級外裝飾材料。那么如何焊接保溫鋁卷呢？
　　
1、濟南鋁卷http://www.pdadn.com/焊接時，焊條不能用焊槍先加熱后蘸取焊粉，因為此焊條熔點太低；焊條必須均勻涂抹焊劑，才能確保焊點的質量；焊接保溫鋁卷的時間不能過長，因熔點太低時間過長容易導致鋁管管壁融化或變薄，打壓極易泄漏；焊接保溫鋁卷的焊槍火焰不能過長，且必須用微火加熱，否則分散劑鋁管極易熔化。
Jinan aluminum coil after welding, the electrode can be heated with a torch dipped in solder powder, melting point is too low because the electrode; welding flux must be applied evenly to ensure the quality of solder joints; time welding aluminum coil insulation can not be too long, because the melting point too low for too long prone to melting or aluminum wall thinning, easy to suppress leakage; torch flame welding aluminum coil insulation can not be too long and must be heated with a slow fire, otherwise dispersants easily melted aluminum.
　　
2、濟南鋁卷http://www.pdadn.com/內膽必須放置濕毛巾，保護到位，因焊接空間很狹小，因此務必注意冰箱的保護。保溫鋁卷焊接一次性成功效果更佳，因鋁管熔旋切刀具點太低，第二次再加熱時，鋁管極易變形。焊接完畢，要等尼龍絲專用漿料二、三分鐘管子冷卻后才水泥儲存庫能接觸，否則焊點易漏。
Jinan aluminum coil liner must be placed wet towels to protect the place, due to welding space is very small, so be sure to pay attention to the protection of the refrigerator. Welding aluminum coil insulation better time success, because aluminum is too low melting point peeling knives, when the second reheating, aluminum easily deformed. Welding is completed, nylon special paste to wait two, three minutes after the cement pipe cooling repository can contact, otherwise leaky joints.